Endress+Hauser Proline Promag W 800 - Mounting procedure; Mounting requirements

Mounting procedure Proline Promag W 800
22 Endress+Hauser
A0029319
5.4 Packaging disposal
All packaging materials are environmentally friendly and 100% recyclable:
• Outer packaging of device
Stretch wrap made of polymer in accordance with EU Directive 2002/95/EC (RoHS)
• Packaging
• Wood crate treated in accordance with ISPM 15 standard, confirmed by IPPC logo
• Cardboard box in accordance with European packaging guideline 94/62/EC,
recyclability confirmed by Resy symbol
• Transport material and fastening fixtures
• Disposable plastic pallet
• Plastic straps
• Plastic adhesive strips
• Filler material
Paper pads
6 Mounting procedure
6.1 Mounting requirements
6.1.1 Mounting position
Mounting location
• Do not install the device at the highest point of the pipe.
• Do not install the device upstream from a free pipe outlet in a down pipe.
A0042131
The device should ideally be installed in an ascending pipe.