Engine distributors DSG-423 User Manual

DSG-423 COOLING SYSTEM
05-15
Coolant Bypass - Replacement
1. Drain the cooling system -- Refer to“Draining the
Cooling System” on page 9 in this section.
2. Remove or disconnect components as necessary to
gain access to the bypass hose.
3. Detach coolant bypass hose from the routing clip.
4. Disconnect the coolant bypass hose from the tubes.
5. Reverse procedure to install.
Bypass
Hose
Retainer
Clip

Engine distributors DSG-423 Specifications

General

Brand	Engine distributors
Model	DSG-423
Category	Engine
Language	English