DSG-423 GENERAL INFORMATION
01-40
6. Tighten the tapersert into the spark plug hole.
7. Turn the mandrel body approximately one-half turn
counterclockwise and remove.
Exhaust Manifold Straightness
• Place the Straightedge across the exhaust manifold
flanges and check for warping with a feeler gauge.
NOTE: The exhaust manifold shown is a typical exhaust
manifold.
Special Tool(s)
Straightedge
303-D039 (D83L-4201-A) or
equivalent
Special Service Tools called for
by the procedures can be
obtained by calling:
1-800-ROTUNDA
(1-800-768-8632)
To Next Page
Loading...
