Navigating WebView
2-6 Starting and Navigating WebView
Port Go to the Port Information and Port Configuration screens,
where you can view and set port administrative, link, speed,
duplex and flow control status.
Trunk Go to the Port Trunking Configuration screen, where you
can add or remove trunks on the device, and add or remove
trunk ports from existing trunks.
Statistics Go to the Port Statistics screen, where you can view port
Ethernet-like MIB statistics and RMON statistics.
Console Go to the Console Configuration screen, where you can
configure device console settings, such as baud rate, time
out, and auto refresh rate.
Apply entries made to the WebView screen on display.
Clear entries made to the WebView screen on display.
Go to WebView online help for this Matrix E1 device.
Table 2-1 Screen Designations and Functions in the Navigation Frame (Continued)
Click on... To...
To Next Page
Loading...
Need help?
General