Checking Status in EpsonNet Config (Windows & Mac OS X) (Epson AcuLaser MX14NF Only)
You can check the status of the print job sent to the printer at the Jobs tab of EpsonNet Config.
See Also:
“Printer Management Software” on page 32
Printing a Report Page
You can print a various types of reports and lists. For details on each report and list, see “Report / List”
on page 208.
Taking the System Settings page as an example, this section describes two methods of printing a report
page.
Printing a System Settings Page
To verify detailed printer settings, print a System Settings page.
The Operator Panel
Note:
The reports and lists are all printed in English.
1. Press the System button.
2. Select Report / List, and then press the
button.
3. Select System Settings, and then press the
button.
The System Settings page is printed.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
Note:
The reports and lists are all printed in English.
1. Click start — All Programs — EPSON — your printer — Printer Setting Utility.
Epson AcuLaser MX14 Series User’s Guide
Printing Basics 108
To Next Page
Loading...
