Epson AcuLaser MX14 User Manual

Chapter 8
Faxing (Epson AcuLaser MX14NF Only)
Connecting the Telephone Line
Note:
Do not connect your printer directly to a DSL (digital subscriber line). This may damage the printer. To
use a DSL, you will need to use an appropriate DSL filter. Contact your service provider for the DSL
filter.
1. Plug one end of a telephone line cord to the wall jack connector and the other end to an active wall
jack.
1
2
1 Wall jack connector
2 To the wall jack
Note:
Use the telephone line cord which has four contacts. The cord included with your printer has four
contacts. It is recommended that you plug the cord to the wall jack which also has four contacts.
Epson AcuLaser MX14 Series User’s Guide
Faxing (Epson AcuLaser MX14NF Only) 172

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English