Chapter 5
Printing Basics
About Print Media
Using paper that is not appropriate for the printer can cause paper jams, image quality problems, or
printer failure. To achieve the best performance from your printer, we recommend you to use only the
paper described in this section.
When using paper other than that recommended, contact the Epson local representative office or an
authorized dealer.
Print Media Usage Guidelines
The printer tray accommodates various sizes and types of paper and other specialty media. Follow
these guidelines when loading paper and media:
❏ Before buying large quantities of any print media, it is recommended that you try a sample first.
❏ For 60 to 135 gsm (16 to 36 lb bond) paper, grain long, where the paper fibers run along the length
of the paper, is recommended. For paper heavier than 135 gsm (36 lb bond), grain short, where the
paper fibers run along the width of the paper, is preferred.
❏ Envelopes can be printed from the multipurpose feeder (MPF) and priority sheet inserter (PSI).
❏ Fan paper or other specialty media before loading in the paper tray.
❏ Do not print on label stock once a label has been removed from a sheet.
❏ Use only paper envelopes. Do not use envelopes with windows, metal clasps, or adhesives with
release strips.
❏ Print all envelopes single-sided only.
❏ Some wrinkling and embossing may occur when printing envelopes.
❏ Do not overload the paper tray. Do not load print media above the fill line on the inside of the paper
width guides.
❏ Adjust the paper width guides to fit the paper size.
❏ If excessive jams or wrinkles occur, use paper or other media from a new package.
Epson AcuLaser MX14 Series User’s Guide
Printing Basics 68
To Next Page
Loading...
Need help?
General