If the Status Monitor icon is not displayed on the taskbar, open Status Monitor from the start menu.
The following procedure uses Microsoft
®
Windows
®
XP as an example.
1. Click start — All Programs — EPSON — your printer — Activate Status Monitor.
The Printer Selection window appears.
2. Click the name of the desired printer from the list.
The Printer Status window appears.
For details about the functions of Status Monitor, refer to the Help of Status Monitor.
See Also:
“Status Monitor (Windows Only)” on page 34
Checking Printer Status Through E-mail (Epson AcuLaser MX14NF Only)
When connected in a network environment where sending and receiving of e-mail is possible, the
printer can send an e-mail report to specified e-mail addresses containing the following information:
❏ The error status which has occurred on the printer
Setting the E-mail Environment
Activate EpsonNet Config. On the Properties tab, configure the following settings according to your
e-mail environment. After configuring the settings on each screen, always click Apply and then turn
off/on the printer to reboot. For details about each item, refer to the Help for EpsonNet Config.
Item Item To Be Configured Description
General Setup —
StatusMessenger
Recipient’s E-mail Address Set the e-mail address to which notices about changes in
printer status or errors are sent.
Notification Items Set the contents of the notices to send in the e-mail.
Port Status
StatusMessenger
Select Enabled.
Epson AcuLaser MX14 Series User’s Guide
Maintenance 312
To Next Page
Loading...
