Clearing Paper Jams From the ADF (Epson AcuLaser MX14NF)
When a document jams while it passes through the Automatic Document Feeder (ADF), remove jams
in the following procedure.
Important:
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
1. Open the ADF cover.
2. Remove the jammed document by carefully pulling it in the direction of the arrow shown in the
following illustration.
Epson AcuLaser MX14 Series User’s Guide
Troubleshooting 256
To Next Page
Loading...
Need help?
General