Epson AcuLaser MX14 User Manual

❏ Locked
❏ Password Locked
Setting the Time for the Power Saver Mode
You can set the Power Saving Timer for the printer. The printer switches to the Power Saver mode
after the specified time.
1. Press the System button.
2. Select Admin Menu, and then press the
button.
3. Select System Settings, and then press the
button.
4. Select Power Saving Timer, and then press the
button.
5. Select Low Power Timer or Sleep Timer, and then press the
button.
6. Press the
or button or enter the desired value using the numeric keypad, and then press the
button.
You can select from 1-30 minutes for Low Power Timer or 6-11 minutes for Sleep Timer.
7. To return to the previous screen, press the (Back) button.
Resetting to Factory Defaults
After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
Note:
The following procedure does not initialize the network settings.
❏ For the Epson AcuLaser MX14NF, to initialize the network settings, refer to “Initialize NVM” on
page 212.
1. Press the System button.
2. Select Admin Menu, and then press the
button.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 250

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English