Epson AcuLaser MX14 User Manual

5. Close the rear cover.
If the error is not resolved, there may be a piece of paper remaining inside the printer. Use the
following procedure to clear the jam.
6. Load a print media on the MFP or PSI if there is no print media.
7. Press the
(Clear All) button on the operator panel for 3 seconds.
The print media is fed to push out the jammed paper.
Clearing Paper Jams From the Center Output Tray
Important:
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
Epson AcuLaser MX14 Series User’s Guide
Troubleshooting 263

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English