Epson AcuLaser MX14 - Defaults Settings

Scan to E-Mail (Epson AcuLaser MX14NF Only)
Use the Scan to E-Mail menu to edit the transmission source.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Edit From Field
Purpose:
To enable or disable editing of the transmission source.
Values:
Disable
Disables editing of the transmission source.
Enable*
Enables editing of the transmission source.
USB Settings
Use the USB Settings menu to change printer settings affecting a USB port.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Port Status
Purpose:
To enable or disable the USB interface.
Values:
Disable
Disables the USB interface.
Enable*
Enables the USB interface.
Defaults Settings
Use the Defaults Settings menu to configure the default copy, scan, and fax settings of the printer.
(The fax feature is available only on the Epson AcuLaser MX14NF.)
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 233