Epson AcuLaser MX14 User Manual

Connection Type Connection Specifications
Ethernet
*
10 Base-T/100 Base-TX compatible
USB USB 2.0 compatible
Wall jack connector
*
RJ11
Phone connector
*
RJ11
* Available only on the Epson AcuLaser MX14NF.
1
*
2
3
*
4
*
1
Ethernet Port
*
2USB Port
3
Wall Jack Connector
*
4
Phone Connector
*
* Available only on the Epson AcuLaser MX14NF.
Connecting Printer to Computer or Network
Connect the printer via Ethernet or USB. (A network connection is available only on the Epson
AcuLaser MX14NF.) Hardware and cabling requirements vary for the different connection methods.
Ethernet cable and hardware are not included with your printer and must be purchased separately.
The available features for each connection type are shown in the following table.
Epson AcuLaser MX14 Series User’s Guide
Printer Connection and Software Installation 39

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English