Problem Action
The printed result has auger mark. The toner cartridge may be low or need to be replaced. Confirm the amount of
toner in the toner cartridge.
1. Check the toner level in the Consumables tab in the Printer Status window of
the Status Monitor.
2. Replace the toner cartridge as necessary.
Start Clean Developer.
1. Launch the Printer Setting Utility, and click Clean Developer on the Diagnosis
tab.
2. Click the Start button.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Wrinkled/Stained Paper
Epson AcuLaser MX14 Series User’s Guide
Troubleshooting 278
To Next Page
Loading...
