Note:
The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Settings Report tab.
3. Select Reports from the list at the left side of the page.
The Reports page is displayed.
4. Click System Settings.
The System Settings page is printed.
Printer Settings
Using the Operator Panel to Change the Printer Settings
You can select menu items and corresponding values from the operator panel.
When you first enter the menus from the operator panel, you see a highlight in the menus. This
highlight indicates the factory default menu setting. These settings are the original printer settings.
Note:
Factory defaults may vary for different countries.
To select a new value as a default menu setting:
1. Press the System button.
2. Select the desired menu, and then press the
button.
3. Select the desired menu or menu item, and then press the
button.
❏ If the selection is a menu, the menu is opened and the list of menu items appears.
❏ If the selection is a menu item, the default menu setting for the menu item is displayed with a
highlight.
Each menu item has a list of values for the menu item. A value can be:
Epson AcuLaser MX14 Series User’s Guide
Printing Basics 109
To Next Page
Loading...
