Epson AcuLaser MX14 User Manual

❏ Set your printer to Ans/FAX Mode and set Auto Ans. Ans/FAX to specify the time for the TAD to
respond.
❏ When the TAD picks up the call, the printer monitors and takes the line if fax tones are received
and then starts receiving the fax.
❏ If the answering device is off, the printer automatically goes into the fax receive mode after the ring
tone sounds for a predefined time.
❏ If you answer the call and hear fax tones, the printer will answer the fax call if you
❏ Set OnHook to On (you can hear voice or fax tones from the remote machine), and then press
the
(Start) button and hang up the receiver.
❏ Press the two-digit remote receive code and hang up the receiver.
Using a Computer Modem
1
2
3
5
4
6
1 To the internet
2Computer
3Printer
4Line
5 Telephone Answering Device
6 Phone
If you want to use your computer modem for faxing or for a dial-up internet connection, connect the
computer modem directly to the back of your printer with the TAD as shown above.
❏ Set your printer to Ans/FAX Mode and set Auto Ans. Ans/FAX to specify the time for the TAD to
respond.
Epson AcuLaser MX14 Series User’s Guide
Faxing (Epson AcuLaser MX14NF Only) 200

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English