Epson AcuLaser MX14 - Making Copies From the Document Glass

Making Copies From the Document Glass
Note:
❏ A computer connection is not required for copying.
❏ For the Epson AcuLaser MX14NF, ensure that no document is in the ADF. If any document is
detected in the ADF, it takes priority over the document on the document glass.
❏ Contaminants on the document glass may cause black spots on the copy printout. For best results,
clean the document glass before use. For more information, see “Cleaning the Scanner” on
page 301.
To make a copy from the document glass:
1. Open the document cover.
2. Place the document face down on the document glass and align it with the registration guide on the
top left corner of the document glass.
Epson AcuLaser MX14 Series User’s Guide
Copying 116