Epson AcuLaser MX14 User Manual

If this trouble happens, contact the Epson local representative office or an authorised dealer.
Mottle
Problem Action
The printed result has mottled
appearance.
Adjust the transfer bias.
1. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click Apply New Settings button.
If you use non-recommended print media, use the print media recommended for
the printer.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Ghosting
Epson AcuLaser MX14 Series User’s Guide
Troubleshooting 275

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English