Epson AcuLaser MX14 - Copy Defaults

Copy Defaults
Use the Copy Defaults menus to configure a variety of copy features.
Note:
Values marked by an asterisk (*) are the factory default menu settings.
Collated
Purpose:
To sort the copy job.
Values:
Off*
Does not sort the copy job.
On
Sorts the copy job.
Auto
Automatically determines which output mode for the copy job.
Reduce/Enlarge
Purpose:
To set the default copy reduction/enlargement ratio.
Values:
mm series
200%
A5 -> A4 (141%)
A5 -> B5 (122%)
100%*
B5 -> A5 (81%)
A4 -> A5 (70%)
50%
inch series
200%
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 234