Epson AcuLaser MX14 - Page 136

The following procedure to scan an image uses Microsoft Clip Organizer as an example.
1. For the Epson AcuLaser MX14NF, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document cover.
For the Epson AcuLaser MX14, place a single document face down on the document glass, and
close the document cover.
See Also:
❏ “Making Copies From the ADF (Epson AcuLaser MX14NF Only)” on page 118
❏ “Making Copies From the Document Glass” on page 116
2. Click start — All Programs — Microsoft Office — Microsoft Office 2010 Tools — Microsoft
Clip Organizer.
3. Click File — Add Clips to Organizer — From Scanner or Camera.
4. In the Insert Picture from Scanner or Camera dialog box, under Device, select your TWAIN
device.
5. Click Custom Insert.
6. Select your scanning preferences and click Preview to display the preview image.
Note:
❏ For the Epson AcuLaser MX14NF, Preview is grayed out and disabled when you select
Document Feeder Tray from Scan From.
Epson AcuLaser MX14 Series User’s Guide
Scanning 136