For the Epson AcuLaser MX14, place a single document face down on the document glass, and
close the document cover.
See Also:
❏ “Making Copies From the ADF (Epson AcuLaser MX14NF Only)” on page 118
❏ “Making Copies From the Document Glass” on page 116
2. Start the drawing software, such as Paint for Windows.
Note:
When you use Windows Vista, use Windows Photo Gallery instead of Paint.
3. Click File — From Scanner or Camera (Paint button — From scanner or camera for
Windows Server 2008 R2 and Windows 7).
The WIA window appears.
Note:
The illustration may vary for different operating systems.
4. Select your scanning preferences and click Adjust the quality of the scanned picture to display
the Advanced Properties dialog box.
5. Select the desired properties including brightness and contrast, and then click OK.
6. Click Scan to start scanning.
Epson AcuLaser MX14 Series User’s Guide
Scanning 138
To Next Page
Loading...
