Epson AcuLaser MX14 User Manual

See Also:
❏ “Loading an Original Document on the ADF” on page 176
❏ “Loading an Original Document on the Document Glass” on page 177
2. To enter the speed dial number, do either of the following after pressing the
(Fax) button:
❏ Select Fax to, and then press the
button. Select Speed Dial, and then press the
button.
❏ Press the Speed Dial button.
3. Enter the speed dial number between 01 and 99 using the numeric keypad.
The corresponding entry’s name briefly appears on the LCD panel.
4. Press the
button.
5. Adjust the document resolution to suit your fax needs.
See Also:
❏ “Resolution” on page 178
❏ “Lighten/Darken” on page 179
6. Press the
(Start) button.
7. The document scans to the memory.
When you are using the document glass, the display prompts you for another page. Select Yes to
add more documents or to select No to begin sending the fax immediately, and then press the
button.
8. The fax number stored in the speed dial location is automatically dialed. The document is sent
when the remote fax machine answers.
Note:
Using the asterisk (*) in the first digit, you can send a document to multiple locations. For example, if you
enter 0*, you can send a document to the locations registered between 01 and 09.
Epson AcuLaser MX14 Series User’s Guide
Faxing (Epson AcuLaser MX14NF Only) 194

Epson AcuLaser MX14 Specifications

General

Brand	Epson
Model	AcuLaser MX14
Category	Printer
Language	English