Epson AcuLaser MX14 - Page 228

Labels 0*
-3 – +3
Envelope 0*
-3 – +3
Recycled 0*
-3 – +3
Postcard 0*
-3 – +3
Density Adjustment
Purpose:
To adjust the print density level within the range of -3 to +3. The factory default menu setting is 0.
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
Yes
Stirs the toner in a new toner cartridge.
No*
Does not stir the toner in a new toner cartridge.
Toner Refresh
Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in a
new toner cartridge.
Values:
Black Yes
Cleans the toner in the toner cartridge.
No*
Does not clean the toner in the toner cartridge.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 228