Epson AcuLaser MX14 - Page 237

Values:
Off
Does not suppress the background.
On*
Suppresses the background of the original to enhance text on the copy.
Gray Balance
Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting
is 0.
Multiple Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Does not perform Multiple Up printing.
Auto
Automatically reduces the original pages to fit onto one sheet of paper.
ID Card Copy
Prints the original pages onto one sheet of paper in the original size.
Manual
Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4 mm*/0.2 inch*
Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-2.0 inch
Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad 237