Epson AcuLaser MX14 - Page 295

Error Code What You Can Do
034-762 Press the
button to clear the message. Try the following:
❏ Lower Modem Speed.
❏ Enable ECM.
034-763 Press the
button to clear the message. Lower Modem Speed.
034-764
034-765
034-766
034-767 Press the
button to clear the message. Check if the phone line is connected properly.
See Also:
“Connecting the Telephone Line” on page 172
034-768 Press the
button to clear the message. Lower Modem Speed.
041-340 Turn off the printer, and then on. If this does not solve the problem, contact the Epson local
representative office or an authorised dealer.
See Also:
“Contacting Epson Support” on page 318
042-358
061-370
062-321
062-790 Press the
button to clear the message. The scanned data is deleted. Retry scanning the document.
075-100 Check and clear the paper path, load the paper, and then press the
button to clear the message.
See Also:
“Clearing Paper Jams From the Front of the Printer” on page 259
075-921 Load paper for the second side (odd) pages, and press the
button.
See Also:
“Manual Duplex Printing (Windows Print Driver Only)” on page 90
077-100 Open the rear cover and remove the jammed paper.
See Also:
“Clearing Paper Jams From the Back of the Printer” on page 261
077-104
077-106
077-108
077-109
077-304 Close the rear cover.
Epson AcuLaser MX14 Series User’s Guide
Troubleshooting 295