❏ Windows Server 2008 64-bit Edition
❏ Windows Server 2008 R2
❏ Windows Vista
®
❏ Windows Vista 64-bit Edition
❏ Windows 7
❏ Windows 7 64-bit Edition
❏ Mac OS X 10.4.11/10.5.8 - 10.6
To attach the printer to a computer:
1. Ensure that the printer, computer, and any other attached devices are turned off and unplugged
from the power source/outlet.
2. Connect one end of a USB cable into the USB port at the rear of the printer, and the other end to a
USB port of the computer.
* USB port
Note:
Do not connect the printer USB cable to the USB connector available on the keyboard.
Network Connection (Epson AcuLaser MX14NF Only)
To connect the printer to a network:
1. Ensure that the printer, computer and any other connected devices have been turned off and all
cables have been disconnected.
Epson AcuLaser MX14 Series User’s Guide
Printer Connection and Software Installation 41
To Next Page
Loading...
