Epson AcuLaser MX14 - Page 49

If the IP address is not resolved automatically, see “Assigning an IP Address (for IPv4 Mode)” on
page 45.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
Note:
The reports and lists are all printed in English.
1. Click start — All Programs — EPSON — your printer — Printer Setting Utility.
Note:
The window to select a printer appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Settings Report tab.
3. Select Reports from the list at the left side of the page.
The Reports page is displayed.
4. Click the System Settings button.
The System Settings page is printed.
If the IP address is 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been
assigned.
See Also:
“Assigning an IP Address (for IPv4 Mode)” on page 45
Epson AcuLaser MX14 Series User’s Guide
Printer Connection and Software Installation 49