6. Click Add.
7. Click Default Browser in the Printer Browser dialog box.
8. Select the printer connected via USB from the Printer Name list.
Name, Location and Print Using are automatically entered.
9. Click Add.
When Using Bonjour (Epson AcuLaser MX14NF Only)
1. Turn on the printer.
2. Ensure that your computer is connected to the network.
Ensure that the Ethernet cable is connected between the printer and the network.
3. Start Printer Setup Utility.
Note:
You can find Printer Setup Utility in the Utilities folder in Applications.
4. Click Add.
5. Click Default Browser in the Printer Browser dialog box.
6. Select the printer connected via Bonjour from the Printer Name list.
Name and Print Using are automatically entered.
7. Click Add.
When Using IP Printing (Epson AcuLaser MX14NF Only)
1. Turn on the printer.
2. Ensure that your computer is connected to the network.
Ensure that the Ethernet cable is connected between the printer and the network.
3. Start Printer Setup Utility.
Epson AcuLaser MX14 Series User’s Guide
Printer Connection and Software Installation 66
To Next Page
Loading...
