A
Output tray Originals scanned in the vertical path position are ejected from
here.
B
Vertical path cover Open when cleaning the inside of the scanner, or when an original
is jammed while scanning in the vertical path position.
C
Output slot Originals scanned in the straight path position are ejected from
here.
D
Control panel Displays the scanner’s status and performs scanner operations.
E
Security slot Insert a security lock for theft prevention.
Side / Rear
A
Scanner position selector Used to change the scanner position between vertical path
position and straight path position.
Scanner Basics
>
Part Names and Functions
22
To Next Page
Loading...
