Epson ES-C320W - Page 87

Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. e edge guides should be aligned so
that they lightly touch the edges of the original.
❏ If you cancel scanning in the middle of scanning a batch of originals, the second original will be fed a little bit into the
ADF and then scanning stops. Open the scanner cover to remove it, and then load the page again together with the rst
page and the rest of the originals.
❏ Depending on the type of paper and the environment in which the scanner is being used, the original may fall from the
front of the scanner aer scanning. In this situation, load fewer originals into the scanner than the specied number of
originals that can be loaded.
Related Information
& “Scanning in Automatic Feeding Mode” on page 93
Placing Originals > Placing Originals in the Scanner > Loading Batches of Originals with Dierent Paper Types an …
87