Epson FX-2180 User Manual

Using the EPSON Remote! Utility
The EPSON Remote! utility allows you to easily change the
printer’s default settings from your computer’s DOS prompt.
Installing EPSON Remote!
Follow the steps below to install EPSON Remote!.
1. Insert Disk 1 of your printer driver software in a disk drive.
2. At the DOS prompt, type
A:\SETUP. (
If you inserted the disk
in a drive other than drive A, substitute the appropriate letter.
)
Then press
Enter
.
3. Select your printer’s name in the Printer Model window and
press
Enter
.
C:\EPUTIL
appears as the default directory.
4. Press
Enter
again. The EPSON Remote! utility is copied to the
C:\EPUTIL directory.
Accessing EPSON Remote!
To access EPSON Remote!, type C:\PRNSET at the DOS prompt
and press Enter. Then follow the on-screen instructions to use
this utility. You can also access EPSON Remote! by typing
C:\PANEL at the DOS prompt and press Enter. The PRNSET
and PANEL access methods differ slightly in that the PANEL
method opens a condensed version of EPSON Remote! that
only provides the most often used settings.
4
R
Sun-G+ Rev.C
A5 size Chapter 4
11/13/97 pass 0
Using the Printer Software 4-21

Epson FX-2180 Specifications

General

Brand	Epson
Model	FX-2180
Category	Printer
Language	English