T Use a grounded power outlet; do not use an adapter plug.
T Make sure the paper path is clear and unobstructed before
you print on continuous paper. (See the next section.)
If you plan to use a printer stand, follow these guidelines:
T Use a stand that supports at least 26 kg (57.8 lb).
T Never use a stand that tilts the printer. The printer should
always be kept level.
T Position your printer’s power cord and interface cable so
they do not interfere with paper feeding. If possible, secure
the cables to a leg of the printer stand.
Positioning the continuous paper supply
Before using continuous paper, make sure you line up your
paper supply with the tractor feeder so the paper feeds
smoothly into the printer, as shown below.
g2-8aaa
1
R
Sun-G+ Rev.C
A5 size Chapter 1
97/11/14 pass 0
Setting Up the Printer 1-5
To Next Page
Loading...
Need help?
General
