Using the Optional Cut-Sheet Feeders
When you install the optional high-capacity cut-sheet feeder (C80673@),
you can load multiple single sheets of paper up to 150 sheets of in the
printer. Also you can create a double-bin cut-sheet feeder by connecting
the second bin cut-sheet feeder (C80674@) to the high-capacity cut-sheet
feeder. The double-bin cut-sheet feeder allows you to load two different
types of single-sheet paper in the printer at the same time and easily
switch between them. To assemble the double-bin cut-sheet feeder and
load paper in the second-bin cut-sheet feeder, see the second-bin cut-sheet
feeder manual. For instructions on selecting bin 1 or bin 2 of the
double-bin cut-sheet feeder, see page A-10.
Note:
The second-bin cut-sheet feeder can be used only in combination with the
high-capacity cut-sheet feeder; you cannot use it alone.
Installing the high-capacity or double-bin cut-sheet
feeder
You install the high-capacity cut-sheet feeder and double-bin cut-sheet
feeder in the same way. Follow the steps below.
Note:
Before installing the double-bin cut-sheet feeder, assemble it as described in the
cut-sheet feeder manual.
w
Warning:
You will need to move the print head by hand before installing the
cut-sheet feeder. If you have just used the printer, the print head may
be hot; let it cool for a few minutes before touching it.
L
Sun-G+ Rev.C
A5 size Appendix A
97/11/14 pass 1
A-4
Enhancing Your Printer With Options
To Next Page
Loading...
