q Use the micro adjust feature to adjust the top-of-form and
tear-off positions. See the Glossary for explanations of the
top-of-form and tear-off positions.
The micro adjust feature allows you to move the paper forward
or backward in 1/216-inch increments so that you can
make precise adjustments to the top-of-form and tear-off
positions. For more information, see Chapter 2.
Available Paper Paths
Your printer provides a variety of paper paths for printing on
continuous and single-sheet paper. As described below, paper
can be fed into the printer from the top, front, bottom, or rear.
You select the paper path that best suits your current printing
needs.
paper release
lever
2-1n
R
Sun-G+ Rev.c
A5 size Introduction
97/11/14 pass 0
Getting to Know Your Printer 3
To Next Page
Loading...
Need help?
General
