For Windows 3.1 or NT 3.5x
Follow the steps below to install the printer driver for
Windows 3.1 or NT 3.5x.
Note:
Installing the printer driver for NT 3.5x may require network
administration privileges. Ask your network administrator for more
information.
1. Make sure Windows 3.1 or NT 3.5x is running and the Program
Manager window is open.
2. Insert Disk 1 of your printer driver software in a disk drive.
3. Choose Run from the File menu. The following dialog box
appears:
4. Type A:\SETUP. (If you inserted the disk in a drive other than
drive A, substitute the appropriate letter.) Then click OK.
The EPSON Printer Driver Setup dialog box appears.
5. Make sure your printer is selected and click
OK
. Follow the
on-screen instructions.
31run
SUN31
1
R
Sun-G+ Rev.C
A5 size Chapter 1
97/11/14 pass 0
Setting Up the Printer 1-19
To Next Page
Loading...
Need help?
General
