Epson FX-2180

Command Lists
Your printer supports the following EPSON ESC/P control codes and
IBM 2381 Plus emulation control codes.
EPSON ESC/P control codes
Selecting an EPSON ESC/P printer in your software allows you to use
advanced fonts and graphics. See the ESC/P Reference Manual for details.
General operation:
ESC @, ESC U, ESC EM
Paper feeding:
FF, LF, ESC 0, ESC 2, ESC 3, ESC 1, ESC A, CR
Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O, ESC ( U
Print position motion:
ESC $, ESC ¥, ESC D, HT, ESC B, VT, ESC J
Font selection:
ESC k, ESC x, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5, ESC E, ESC F,
ESC !
Font enhancement:
ESC W, DC4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T, ESC S, ESC -
Spacing:
ESC Space
Character handling:
ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7, ESC I
Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC ^, ESC *
Bar code:
ESC ( B
C
R
Sun-G+ Rev.C
A5 size Appendix c
97/11/13 pass 0
Specifications
C-11