c
Caution:
Because printing on the edge of an envelope may damage the print
head, make sure the printing stays entirely within the printable
area of your envelopes. See Appendix C for details on the printable
area of envelopes.
Loading postcards
You can load postcards one at a time in the top or front paper
slot as described in “Loading Single Sheets in the Top Paper
Slot” or “Loading Single Sheets in the Front Paper Slot,” later in
this chapter. Also, follow these guidelines:
T If you load postcards long edge first, always load them in
the top slot.
T Set the paper thickness lever (located under the printer
cover) to position 3.
T Before printing, turn on the card mode by pressing the
Tear Off/Bin button until both Tear Off/Bin lights are on.
After you finish printing on postcards, press the Tear
Off/Bin button once to exit the card mode. (Bin 1 is
selected.)
T Use postcards only under normal temperature and
humidity conditions, as follows:
Temperature 15 to 25°C (59 to 77°F)
Humidity 30 to 60% RH
new11
3
Sun-G+ Rev.C
A5 size Chapter 3
97/11/14 pass 1
Printing on Single Sheets 3-7