Epson FX-2180 User Manual

For DOS programs
To control the printer from DOS application programs, you
need to select the printer you are using or another available
printer from the printer list of your application.
Choose the EPSON FX-2180 printer at the appropriate step
in the setup or installation procedure of your DOS application
program. If the list in your application does not include the
FX-2180 printer, choose the first available printer from this list:
FX-2170
FX-880/FX-1180
FX-870/1170
FX-850/1050
FX-800/1000
EX-800/1000
FX-85/105
FX-80+/100+
FX-80/100
If none of these printers is listed, choose the first one available
from the following:
FX
LX
RX
MX
EPSON printer
Standard printer
Draft printer
ASCII printer
Note:
If your application does not list a suitable alternative, contact the
software manufacturer to see if an update is available.
L
Sun-G+ Rev.C
A5 size Chapter 1
97/11/14 pass 0
1-20
Setting Up the Printer

Epson FX-2180 Specifications

General

Brand	Epson
Model	FX-2180
Category	Printer
Language	English