Removing continuous paper with labels
To avoid peeling labels off the backing sheet and jamming the
printer, follow the steps below when you remove continuous
paper with labels from the printer.
1. After you finish printing, tear off the fresh supply of
continuous labels at the perforation nearest the paper entry
slot.
2. Hold down the
LF/FF
button to eject the remaining labels from
the printer.
c
Caution:
Never press the Load/Eject or Tear Off/Bin button. When fed
backward, labels can easily come off the backing sheet and cause a
paper jam.
g3-19
L
Sun-G+ Rev.C
A5 size Chapter 2
97/11/17 pass 3
2-8 Printing on Continuous Paper
To Next Page
Loading...
