Loading single-sheet multi-part forms
You can load single-sheet multi-part forms one at a time in the
top or front paper slot as described in “Loading Single Sheets
in the Top Paper Slot” or “Loading Single Sheets in the Front
Paper Slot,” later in this chapter. Also, follow these guidelines:
T Use only carbonless multi-part forms bound as shown
below.
T You can use the top or front paper slot to load single-sheet
multi-part forms that are bound at the top.
Insert this type of form in the top slot with the bound edge first
and the printable side down, as shown below.
bound only at the top
by line glueing
bound only at the side
by line glueing
New04, 06
printable side down
new03
L
Sun-G+ Rev.C
A5 size Chapter 3
97/11/14 pass 1
3-4 Printing on Single Sheets
To Next Page
Loading...
Need help?
General
