The printer you want to use is
not selected in your software.
Choose the correct printer from the
Windows desktop or in your
application before printing.
Your application software is
not configured correctly for
your printer.
Make sure that your application
software is set up correctly for your
printer. See your application
documentation. If necessary, install or
reinstall the printer driver software as
described in Chapter 1.
Software settings override
settings you make using the
default-setting mode, EPSON
Remote!, or the control panel
buttons.
Use your application software to select
the font.
Vertical printed lines are not aligned.
Cause What to do
Bidirectional printing, which
is the printer’s standard
printing mode, is out of
alignment.
Use the printer’s bidirectional
adjustment mode to correct this
problem. See “Aligning Vertical Lines
in Your Printout” later in this chapter.
7
Troubleshooting
R
Sun-G+ Rev.C
A5 size Chapter 7
97/11/14 pass 1
Troubleshooting 7-15
To Next Page
Loading...
Need help?
General
