c
Caution:
There are several models of the printer designed for different
voltages, and it is not possible to adjust the printer for use with
another voltage. If the label on the back of the printer does not
show the correct voltage for your country, contact your dealer.
You must remove all protective materials packed around and
inside your printer before you set it up and turn on the power.
Follow the directions on the Notice Sheet (packed with the
printer) to remove these materials. A screwdriver has been
provided for removing the transportation screw.
Save all packing and protective materials, including the
transportation screw and the protective locking clips on the
paper tension unit, in case you need to ship the printer in
the future. It should always be transported in its original
packaging or equivalent materials.
1
R
Sun-G+ Rev.C
A5 size Chapter 1
97/11/14 pass 0
Setting Up the Printer
1-3
To Next Page
Loading...
Need help?
General
