3. Press the tractor’s lock tabs, tilt the tractor toward you, and
lift it off the printer.
4. Store the tractor in a safe place, or install it in the front push
position as described on page 2-9.
5. To replace the paper tension unit, lower it onto the printer’s
mounting pegs. Then press down both ends of the unit
until it clicks into place.
6. Replace the paper guide and printer cover. Then close the paper
guide cover.
g3-17-3
g1-9-1
L
Sun-G+ Rev.C
A5 size Chapter 2
97/11/17 pass 3
2-34 Printing on Continuous Paper
To Next Page
Loading...
Need help?
General
