Epson L1800 - Ink Supply Tank Tube Assy Section

To Next Page

To Previous Page

L1800 Revision A

Disassembly And Assembly Disassembling the CISS section 104

Confidential

3.7.3 Ink Supply Tank Tube Assy section

3.7.3.1 Ink Supply Tank Tube Assy

 Route the Ink Supply Tank Tubes with the red lines facing upward (as viewed when the Ink Supply Tank Assy is installed on the printer) and connect them to the Ink Supply Tank Assy

without any twist.

 When connecting the Ink Supply Tank Tubes to the Ink Supply Tank, confirm the color indicated on the film of the Ink Supply Tank, and take care not to connect them with wrong joints.

 When connecting the Ink Supply Tank Tubes to the Ink Supply Tank, insert the tubes to the full and make sure the gaps between the end of tubes and the tank are 0.5 mm long or less.

 Route the tube through the arch on the Bottom Tube Holder. Take care not to catch the Ink Supply Tank Tube then.

 Route Yellow, Black, and Light Cyan of the Ink Supply Tank Tube Assy through the hole on the Bottom Tube Holder.

179 ± 1 mm

278 ± 1 mm

Black

Magenta

Yellow

424 ± 3 mm

338 ± 3 mm

312 ± 3 mm

Light Magenta

Cyan