L1800 Revision A
Disassembly And Assembly Disassembling the CISS section 105
Confidential
3.7.3.2 Joint
3.7.4 Ink Supply Tank Assy section
3.7.4.1 Valve Position Label
Make sure the red lines of the Ink Supply Tank Tube and Ink Supply Tube facing
upward.
When attaching the Joint, align the cutout of the Joint with the rib of the Ink Supply
Tube Guide 1st.
Make sure the gaps between the end of Ink Supply Tank Tubes or Ink Supply Tubes
and the Joint are 0.5 mm long or less.
When connecting the Ink Supply Tank Tube to the Joint, take care noto to connect it
to a wrong joint.
0.5 mm or less
Ink Supply Tube
Ink Supply Tank Tube
Joint
0.5 mm or less
Joint
RibInk Supply Tube
Ink Supply Tube Guide 1st
Attach the Refilling Ink Label and Valve Position Label according to the standards
shown in the figure above.
6.4 mm
7.5 mm 7.5 mm
Valve Position Label
To Next Page
Loading...
