L1800 Revision A
Product Description Operation Buttons & Indicators (LEDs) 6
Confidential
1.1.4 Errors & Remedies
Note : For more information on the remedies, see “2.1.1 Troubleshooting according to Error Messages” (p.8).
Table 1-5. Errors & Remedies
Error Occurrence terms How to release
Fatal error When the unit detects an error which is impossible to work correctly. Turn off and restart the unit. (If occurs repeatedly, it must be repaired.)
Ink waste pad overflow error When the ink waste fluid comes full. Turn off the unit.
Change the absorber in the printer enclosure by a service person. and write
EEPROM’s data.
Ink waste pad near end error When the ink waste fluid nears full capacity. Press the Release error key.
By pressing the Stop key, it cancels print data.
Paper jam error When the paper loading or paper ejecting is not success.
Remove paper and push the Release error key to continue.
By pressing the Release error key, ejects the paper and continue the procedure if
the paper ejecting is success.
By pressing the Cancel key, it cancels error display and cancels print data and
returns from error status.
Paper out error Failure to load paper to print.
Set paper and push the Release error key to continue.
By pressing the Release error key, feeds the paper and continue the procedure if
the paper feeding is success.
By pressing the Stop key, it cancels error display and cancels print data and
returns from error status.
Multiple feed error When the paper is ejected without printing.
When the fed paper size is longer than the specified value during
duplex printing.
Reset the incorrectly ejected paper and push the Release error key to continue.
By pressing the Release error key, feeds the paper and continue the procedure if
the paper feeding is success.
By pressing the Stop key, it cancels error display and cancels print data and
returns from error status.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
