Epson L1800 - Page 53

L1800 Revision A
Disassembly And Assembly Removing the Housings 48
Confidential
2. Disengage the nine hooks on the bottom of the Panel Unit, and remove the Panel
Unit while pulling out its tab.
3. Disconnect the Panel FFC from the Panel Board connector and remove the Panel
Unit.
Figure 3-20. Removing the Panel Unit (2)
Hook
Tab
Connector
Panel FFC
Panel Unit
 Be careful not to get the Panel FFC caught underneath the
hooks on the Panel Unit.
 Secure the Panel FFC to the Panel Unit with a piece of double-
sided tape.
Figure 3-21. Securing the Panel FFC
Panel Unit
Double-sided tape
Panel FFC