Functions 2. Part Names and Functions
RC700 Series Rev.3 87
RC700-A-UL
UL-Compliant Controller (RC700-A-UL):
(24) Lock out feature
This feature is used to lock out the power switch when working with the power off
such as maintenance.
A padlock for lockout should be prepared by users.
Applicable shackle diameter: 4.0 to 6.5 mm
Perform lockout using the following procedure.
(1) Remove a fixing screw of lockout bracket A by hand.
(2) Rotate the lockout bracket A.
(3) Set the screw removed in the step (1) to the lockout
bracket B so as not to lose it.
(4)
Put a padlock through the holes of the lockout
brackets A and B to lock.
To Next Page
Loading...
