Epson RC700 Series - Page 116

Functions 3. Installation
98 RC700 Series Rev.3
(A) Flat mounting, (C)Rack mounting
100 mm
200 mm
Excluding the installation side
such as base table
Air flow of the fan
50 mm
50 mm
50 mm *
(Figure Flat mounting)
(B) Upright mounting
100 mm
200 mm
Excluding the installation side such as
base table
Air flow of the fan
50 mm
50 mm *
50 mm
- Hot air with higher temperature than the ambient temperature (about 10 °C) comes out
from the Controller. Make sure that heat sensitive devices are not placed near the
outlet.
- Arrange the cables in front of the Controller so that you can pull the Controller forward.