Epson RC700 Series - Page 117

Functions 3. Installation
RC700 Series Rev.3 99
3.2.3 Wall Mounting Option
The controller has a wall mounting option. For the procedure a
bout installation, refer to
RC700 Series Maintenance Manual.
Controller outer dimensions when using the wall mounting option
Dimensions of the mounting holes for the wall
(Unit: mm)
Ensure the air flow around the supply and exhaust ports, and install the Controller while
leaving space from other equipment or walls as below.
* Keep the space about 200 mm or more on the top to maintenance.
Wall mounting with the front side down
100 mm
200 mm
50 mm
*
50 mm
50 mm
Wall mounting with the front side up
100 mm
200 mm
50 mm *
50 mm
50 mm